Debian Science Engineering packages

CalculiX is a free and open source finite element analysis application that uses a similar input format to Abaqus. It has an implicit and explicit solver and a pre and post processor (CGX). This package contains the solver CalculiX CrunchiX (cxx).

CalculiX GraphiX (cgx) is a 3-dimensional pre- and post-processor for finite elemnts. CalculiX CrunchiX Finite Element Models can be build, calculated and post-processed. The pre- and post-processor is an interactive 3D-tool using the openGL API.

In addition to the Calculix CrunchiX results files (frd) results from OpenFoam, Duns (2D and 3D), Isaac (2D and 3D) and Nastran (f06) can be read. For preprocessing Netgen nativ format, STEP and STL can be imported.

A small engineering tool that calculates member forces and support reactions of a continuous beam. A material and section database is included to set elasticity and moment of inertia. Boundary conditions can be set differently at each support.

The CFD General Notation System (CGNS) provides a general, portable, and extensible standard for the storage and retrieval of computational fluid dynamics (CFD) analysis data. It consists of a collection of conventions, and free and open software implementing those conventions. It is self-descriptive, machine-independent, well-documented, and administered by an international steering committee. It is also an American Institute of Aeronautics and Astronautics (AIAA) Recommended Practice.

This package contains the adf2hdf, hdf2adf tools.

Code_Aster is the finite element PDE solver used by the French nuclear industry. code-aster-gui provides a Tcl front end to its Python build and control systems.

This package contains the code-aster-gui client, which needs to connect to a locally or remotely installed server (in the package "code-aster-run").

The basic capabilities of Code_Saturne enable the handling of either incompressible or expandable flows with or without heat transfer and turbulence. Dedicated modules are available for specific physics such as radiative heat transfer, combustion (gas, coal, heavy fuel oil, ...), magneto-hydrodynamics, compressible flows, two-phase flows (Euler-Lagrange approach with two-way coupling), extensions to specific applications (e.g. Mercure_Saturne for atmospheric environment).

It runs in parallel with MPI on distributed memory machines. Developed since 1997 at EDF R&D, it is based on a co-located Finite Volume approach that accepts meshes with any type of cell (tetrahedral, hexahedral, prismatic, pyramidal, polyhedral...) and any type of grid structure (unstructured, block structured, hybrid, conforming or with hanging nodes, ...).

Dime є бібліотекою класів Сі++ для читання, створення, маніпулювання та запису даних файлів DXF.

Цей пакунок постачається разом із програмами „dxf2vrml“ (перетворює файли dxf у VRML) та „dxfsphere“ (виконує сітчасте наближення сфер).

FEniCS is a collection of free software for automated, efficient solution of differential equations.

FEniCS has an extensive list of features, including automated solution of variational problems, automated error control and adaptivity, a comprehensive library of finite elements, high performance linear algebra and many more.

FEniCS is organized as a collection of interoperable components, including the problem-solving environment DOLFIN, the form compiler FFC, the finite element tabulator FIAT, the just-in-time compiler Instant, the code generation interface UFC, the form language UFL and a range of additional components.

This is a metapackage which depends on all FEniCS components.

This is the legacy version of FEniCS. You may want to consider installing the next-generation FEniCS-X (fenicx package).

For 3D printing, CNC milling or for the manual assembly of complicated constructs one needs a formal specification of the workpiece, i.e., its parts and how these come together. The process to get there is called Computer-Aided Design (CAD). The process to transform a CAD model into a series of instructions that can be performed on a machine is called Computer-Aided Manufacturing (CAM). FreeCAD can do both, the prior yet a bit better than the latter.

FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python. It features some key concepts like macro recording, workbenches, ability to run as a server and dynamically loadable application extensions and it is designed to be platform independent.

Currently, FreeCAD can import and display CAD models in IGES, STEP, and BRep formats and meshes in STL, BMS, AST and Wavefront OBJ formats. Editing and modeling features are currently somewhat limited.

This is a metapackage of FreeCAD component packages.

Gerris являє собою систему для розв’язання часткових диференціальних рівнянь, що описують потік рідини.

Короткий опис його основних (поточний) функції:

• розв’язування рівнянь залежних від часу нестискуваних змінних щільностей Ейлера, Стокса або Нав’є-Стокса;

• адаптивне уточнення сітки: розподільча здатність адаптується автоматично до властивостей потоку;

• повністю автоматична генерація сітки складної геометрії;

• другий порядок в просторі та часі;
• необмежена кількість адвекцативних/розсіюваних пасивних трейсерів;
• гнучка специфікація описів додаткових джерел;
• переносима підтримка паралелей, використовуючи бібліотеку MPI;
• об’єм рідини в адвекційних схемах для міжфазових потоків.

Цей пакунок надає вбудовану підтримку інтерфейсу передачі повідомлень (MPI).

GetDP is a general finite element solver using mixed elements to discretize de Rham-type complexes in one, two and three dimensions.

The main feature of GetDP is the closeness between the input data defining discrete problems (written by the user in ASCII data files) and the symbolic mathematical expressions of these problems.

See GetDP's reference manual for a more thorough overview of GetDP's capabilities: http://www.geuz.org/getdp

Gmsh — це генератор тривимірних кінцевих елементів, представлених полігонами, з вбудованими засобами САПР та після-обробкою. Програма задумана як простий інструмент створення полігональних об’єктів з можливістю введення параметрів об’єкта та сучасними засобами візуалізації. Gmsh складається з чотирьох модулів: геометрії, полігону, розв’язувача та після-обробки. Введення параметрів створюваного об’єкта у модулі здійснюється або інтерактивно — засобами графічного інтерфейсу користувача, або за допомогою текстових ASCII-файлів з використанням власної мови сценаріїв Gmsh.

Більш детальний огляд можливостей Gmsh дається у керівництві користувача Gmsh.

The Adaptable IO System (ADIOS) provides a simple, flexible way for scientists to describe the data in their code that may need to be written, read, or processed outside of the running simulation. By providing an external to the code XML file describing the various elements, their types, and how you wish to process them this run, the routines in the host code (either Fortran or C) can transparently change how they process the data.

This package provides tools for use with ADIOS.

LibreCAD — застосунок для автоматизованого проектування (САПР) у двох вимірах (2D). З допомогою LibreCAD можна створювати технічні креслення, зокрема плани будівель, інтер’єрів, механічних частин або ж схеми та діаграми.

This package contains a number of utilities for manipulating and viewing Silo files. Silo is a scientific data format library.

Silo supports gridless (point) meshes, structured meshes, unstructured-zoo and unstructured-arbitrary-polyhedral meshes, block structured AMR meshes, constructive solid geometry (CSG) meshes, piecewise-constant (e.g. zone-centered) and piecewise-linear (e.g. node-centered) variables defined on the node, edge, face or volume elements of meshes as well as the decomposition of meshes into arbitrary subset hierarchies including materials and mixing materials. In addition, Silo supports a wide variety of other useful objects to address various scientific computing application needs. Although the Silo library is a serial library, it has some key features which enable it to be applied quite effectively and scalable in parallel.

lxi-tools is collection of open source software tools that enables control of LXI-compatible instruments such as modern oscilloscopes, power supplies, spectrum analyzers etc.

NETGEN — автоматичний генератор тривимірних чотиригранних сіток. На вході приймаються об’єкти з файлу формату STL, задані засобами (мови) конструктивної геометрії твердих тіл (CSG) чи контурного подання (BRep). NETGEN містить модулі для оптимізації та ієрархічного дроблення сіток.

OpenFOAM is the free, open source CFD software released and developed primarily by OpenCFD Ltd since 2004. It has a large user base across most areas of engineering and science, from both commercial and academic organisations. OpenFOAM has an extensive range of features to solve anything from complex fluid flows involving chemical reactions, turbulence and heat transfer, to acoustics, solid mechanics and electromagnetics.

Package contains binaries.

Persalys is a graphical user interface for OpenTURNS, dedicated to the treatment of uncertainty and the management of variabilities. The software is a tool between the computer simulation, probabilistic analyses and the data sciences. The interface is available in French or in English.

Persalys allows one to:

• create mathematical models: analytical, coupling with an external model (finite elements, ...), FMU;
• analyse the variability of one's parameters thanks to many methods and visualisation tools;
• statistically analyse one's measuring data, infer probability distributions or create metamodels.

It lets you manipulate 3D models in binary or ASCII STL format and partially repair them if necessary.

This is the Python 3 version of the package.

DOLFIN is the Python and C++ interface of the FEniCS project for the automated solution of differential equations, providing a consistent PSE (Problem Solving Environment) for solving ordinary and partial differential equations. Key features include a simple, consistent and intuitive object-oriented API; automatic and efficient evaluation of variational forms; automatic and efficient assembly of linear systems; and support for general families of finite elements.

This is the base package depending on specific dolfin builds. By default the version built against the preferred version of PETSc in /usr/lib/petsc is selected (with 32-bit indexing, but the alternative version (64-bit PETSc) can be selected by setting the environment variable PETSC_DIR.

This is the legacy version of DOLFIN, you may want to install the next-generation python3-dolfinx (DOLFIN-X) instead.

Escript is a programming tool for implementing mathematical models in Python using the finite element method (FEM). Because users do not access the data structures it is very easy to use and scripts can run on desktop computers as well as highly parallel supercomputer without changes. Application areas for escript include earth mantle convection, geophysical inversion, earthquakes, porous media flow, reactive transport, plate subduction, erosion, and tsunamis.

Scripts can be executed in parallel (on varying numbers of threads or nodes) without any special modifications.

Escript now includes the esys.downunder module for 3D inversion of geophysical data sets. The current version supports gravity, magnetic and joint inversion.

This package contains the commands and libraries for Python3 with OpenMP threading and MPI multiprocess support.

Escript is a programming tool for implementing mathematical models in Python using the finite element method (FEM). Because users do not access the data structures it is very easy to use and scripts can run on desktop computers as well as highly parallel supercomputer without changes. Application areas for escript include earth mantle convection, geophysical inversion, earthquakes, porous media flow, reactive transport, plate subduction, erosion, and tsunamis.

Scripts can be executed in parallel (on varying numbers of threads or nodes) without any special modifications.

Escript now includes the esys.downunder module for 3D inversion of geophysical data sets. The current version supports gravity, magnetic and joint inversion.

This package contains the commands and libraries for Python3 with both OpenMP threading and MPI multiprocess support.

The FInite element Automatic Tabulator FIAT supports generation of arbitrary order instances of the Lagrange elements on lines, triangles, and tetrahedra. Other supported elements include arbitrary order Raviart-Thomas elements, Brezzi-Douglas-Marini elements and a few others.

This package installs the library for Python 3.

OpenTURNS is a powerful and generic tool to treat and quantify uncertainties in numerical simulations in design, optimization and control. It allows both sensitivity and reliability analysis studies:

• defining the outputs of interest and decision criterion;
• quantify and model the source of uncertainties;
• propagate uncertainties and/or analyse sensitivity and
• rank the sources of uncertainty

Targeted users are all engineers who want to introduce the probabilistic dimension in their so far deterministic studies.

This package provides the Python3 bindings to the library.

Persalys is a graphical user interface for OpenTURNS, dedicated to the treatment of uncertainty and the management of variabilities. The software is a tool between the computer simulation, probabilistic analyses and the data sciences. The interface is available in French or in English.

Persalys allows one to:

• create mathematical models: analytical, coupling with an external model (finite elements, ...), FMU;
• analyse the variability of one's parameters thanks to many methods and visualisation tools;
• statistically analyse one's measuring data, infer probability distributions or create metamodels.

This package contains the Python3 bindings.

This is a Python3 interface to SILO, a scientific I/O library.

Silo supports gridless (point) meshes, structured meshes, unstructured-zoo and unstructured-arbitrary-polyhedral meshes, block structured AMR meshes, constructive solid geometry (CSG) meshes, piecewise-constant (e.g. zone-centered) and piecewise-linear (e.g. node-centered) variables defined on the node, edge, face or volume elements of meshes as well as the decomposition of meshes into arbitrary subset hierarchies including materials and mixing materials. In addition, Silo supports a wide variety of other useful objects to address various scientific computing application needs. Although the Silo library is a serial library, it has some key features which enable it to be applied quite effectively and scalable in parallel.

Sailcut CAD is a sail design and plotting software which allows you to design and visualise your own sails and compute the accurate development of all panels in flat sheets. You can export the sails you create to DXF, plaintext or Carlson plotter files.

Sailcut CAD's user interface is available in English, French, Dutch, German, Italian, Norwegian, Portuguese, Danish and Russian.

A command line probabilistic risk analysis tool capable of performing event tree analysis, static fault tree analysis, analysis with common cause failure models, probability calculations with importance analysis, and uncertainty analysis with Monte Carlo simulations.

SolveSpace is a parametric 2d/3d CAD program. Applications include:

• modeling 3d parts — draw with extrudes, revolves, helix creation, and Boolean (union / difference / intersection) operations;
• modeling 2d parts — draw the part as a single section, and export DXF, PDF, SVG; use 3d assembly to verify fit;
• 3d-printed parts — export the STL or other triangle mesh expected by most 3d printers;
• preparing CAM data — export 2d vector art for a waterjet machine or laser cutter; or generate STEP or STL, for import into third-party CAM software for machining;
• mechanism design — use the constraint solver to simulate planar or spatial linkages, with pin, ball, or slide joints;
• plane and solid geometry — replace hand-solved trigonometry and spreadsheets with a live dimensioned drawing.

SYRTHES — програмне забезпечення, розроблене групою EDF, для моделювання теплопровідності й передачі теплового випромінювання у складних об’ємних тілах.

SYRTHES можна використовувати у зв’язці з програмним забезпеченням Code_Saturne, яке застосовується в області обчислювальної гідродинаміки (Computational Fluid Dynamics, CFD).

TetGen generates the Delaunay tetrahedralization, Voronoi diagram, and convex hull for three-dimensional point sets, generates the constrained Delaunay tetrahedralizations and quality tetrahedral meshes for three-dimensional domains with piecewise linear boundary.

Z88 включає в себе 20 типів скінченних елементів, що включають плоский натяг, вигин площини, аксіально-симетричні структури і просторові структури до 20-вершиннного серендипового гексаедра. Z88 поставляється зі зручним і дружнім інтерфейсом, потужним генератором сітки, DXF-конвертером, двома програмами побудови графіків і двома потужними вирішувачами. Підтримується імпорт COSMOS-файлів з Pro/ENGINEER та Pro/MECHANICA.

ANN is a library written in C++, which supports data structures and algorithms for both exact and approximate nearest neighbor searching in arbitrarily high dimensions. ANN assumes that distances are measured using any class of distance functions called Minkowski metrics. These include the well known Euclidean distance, Manhattan distance, and max distance. ANN performs quite efficiently for point sets ranging in size from thousands to hundreds of thousands, and in dimensions as high as 20.

This package contains the ann2fig (display ANN output in fig format) and the ann_sample (a sample demonstration for ANN) programs.

CalculiX is a free and open source finite element analysis application that uses a similar input format to Abaqus. It has an implicit and explicit solver and a pre and post processor (CGX).

This package contains the documentation in html format for CalculiX CrunchiX

CalculiX is a free and open source finite element analysis application that uses a similar input format to Abaqus. It has an implicit and explicit solver and a pre and post processor (CGX).

This package contains example files for CalculiX CrunchiX.

CalculiX GraphiX (cgx) is a 3-dimensional pre- and post-processor for finite elemnts. CalculiX CrunchiX Finite Element Models can be build, calculated and post-processed. The pre- and post-processor is an interactive 3D-tool using the openGL API.

In addition to the Calculix CrunchiX results files (frd) results from OpenFoam, Duns (2D and 3D), Isaac (2D and 3D) and Nastran (f06) can be read. For preprocessing Netgen nativ format, STEP and STL can be imported.

This package contains the examples.

Monitoring distributed applications that are spread over a network is not an easy task. Information from several sources must be gathered, filtered and distributed to visualisation tools.

LogService is a system that simplifies this task. It acts as a common base between an application and it's visualisation tools. It also provides a mechanism to classify and filter messages in a general way and other functions are needed to monitor distributed applications.

The service is named LogCentral.

Monitoring distributed applications that are spread over a network is not an easy task. Information from several sources must be gathered, filtered and distributed to visualisation tools.

LogService is a system that simplifies this task. It acts as a common base between an application and it's visualisation tools. It also provides a mechanism to classify and filter messages in a general way and other functions are needed to monitor distributed applications.

The service is named LogCentral.

Evaluation of control charts by means of the zero-state, steady-state ARL (Average Run Length). Setting up control charts for given in-control ARL and plotting of the related figures. The control charts under consideration are one- and two-sided EWMA and CUSUM charts for monitoring the mean of normally distributed independent data. Now, the ARL calculation of EWMA-S^2 control charts is added. Other charts and parameters are in preparation. Further SPC areas will be covered as well (sampling plans, capability indices ...).

METIS: A Family of Multilevel Partitioning Algorithms

This is a collection of serial and parallel programs & libraries that can be used to partitioning unstructured graphs, finite element meshes, and hypergraphs, both on serial as well as on parallel computers.

Adaptation of METIS for Code_Aster purpose

BRL-CAD is a powerful combinatorial Constructive Solid Geometry solid modeling system that includes interactive 3D solid geometry editing, high-performance ray-tracing support for rendering and geometric analysis, network-distributed framebuffer support, image and signal-processing tools, path-tracing and photon mapping support for realistic image synthesis, a system performance analysis benchmark suite, an embedded scripting interface, and libraries for robust high-performance geometric representation and analysis.

BRL-CAD supports a great variety of geometric representations including an extensive set of traditional CSG primitive implicit solids such as boxes, ellipsoids, cones, and tori, as well as explicit solids made from closed collections of Uniform B-Spline Surfaces, Non-Uniform Rational B-Spline (NURBS) surfaces, n-Manifold Geometry (NMG), and purely faceted mesh geometry. All geometric objects may be combined using boolean set-theoretic CSG operations including union, intersection, and difference.

DIET (Distributed Interactive Engineering Toolbox) is a middleware designed for HPC (High Performance Computing) in heterogeneous and distributed environments (workstations, clusters, grids, clouds). DIET provides a standard-compliant implementation of OGF (Open Grid Forum) Grid RPC API. It works in a hierarchical fashion, clients requests computational resources to a hierarchy of agents which will choose the most adequate computational service (known as SeD or Server Daemon).

DIET is the core component of SysFera-DS HPC middleware (http://www.sysfera.com/SysFera-DS,10).

This package include agents necessary to run a DIET hierarchy.

The aim of openmeca is to provide a software for simulating mechanical systems easily. It provides a graphical application that build a 3D scheme, where the bonds are represented by symbols and gives a simple way to apply loadings, boundary conditions and manage contacts.

Salomé is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality.

This package contains the Salomé GUI runtime binaries, private libraries, and python files comprising a basic Salomé GUI installation.

Salomé is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality.

This package contains the Salomé JOBMANAGER module.

Salomé is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality.

This package contains the Salomé core runtime binaries, private libraries, and python files comprising a basic Salomé installation.

Salomé is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality.

This package contains the Salomé MED private libraries and python files.

Salomé is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality.

This package contains the Salomé PARAVIS module, for visualization using paraview.

Salomé is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality.

This package contains the Salomé SMESH module.

Salomé is a pre- and post-processor for numerical simulations. It can import CAD files in IGES and STEP formats, facilitates component integration in heterogeneous systems, and has a user-friendly GUI as well as a Python console with all of the platform functionality.

This package contains the Salomé YACS module. YACS stands for dYnamic pArallel Coupling System.

Tochnog is a program for finite element analysis. Multithreading and multiprocessor systems are supported. Here is a partial list of models supported:

• Differential equations (materials).
• Convection-diffusion equations,
• Stokes and Navier-Stokes,
• Elasticity (isotropy and transverse isotropy),
• Plasticity (Von-Mises, Mohr-Coulomb, Gurson, etc.; plasticity surfaces can be arbitrarily combined).

Residues in equations and error estimates for all data can be printed/plotted.

VARKON is a high level development tool for applications in the area of Engineering, Computer Aided Design and Product Modelling.

VARKON can be used as a traditional CAD-system with drafting, modelling and visualisation if you want to but the real power of VARKON is in parametric modelling and CAD applications development. VARKON includes interactive parametric modelling in 2D or 3D but also the unique MBS programming language integrated in the graphical environment.

AVL is a program for the aerodynamic and flight-dynamic analysis of rigid aircraft of arbitrary configuration. It employs an extended vortex lattice model for the lifting surfaces, together with a slender-body model for fuselages and nacelles. General nonlinear flight states can be specified. The flight dynamic analysis combines a full linearization of the aerodynamic model about any flight state, together with specified mass properties.

The package contains a wrapper on top of the ADF and MLL APIs, some tools, demos, tests, and examples taken from the CGNS tutorial.